Product Data - Wall Panel
MasterFormat 09 78 19
Description & Uses
Concreate Wall Panels:
These thin concrete panels posses the attractive mottled look and smooth feel that only real burnished concrete can provide. They are lightweight and durable and can be easily adhered to walls and other vertical interior surfaces. Concreate Panels may be applied to gypsum board, plaster, concrete, unit masonry, engineered wood panels, and other acceptable substrates.
Concreate Ceiling Panels:
For overhead use, panels can be installed in most standard ceiling suspension grids; (do not place insulation or other
back loads on panels).
Concreate Veneer – Other Uses:
Panels can also be used on cabinets, countertop
Concrete Panel: 4 mm (1/8-inch)
thick proprietary blend of portland cement, select fine aggregate, admix- tures, recycled fibers, and fade resis- tant pigments.
Oil Finish: Our floors are finished
with three coats of high solids, natural oils to increase the luster, durability,
and stain.ility, and stain.
Size, Area, And Mass
• Size: 1200 x 600 x 4 mm (47-¼ x 23-5/8 x 1/8 inch)
• Area: 0.72 m2 (7.75 ft²)
• Mass: 6.5 kg/M2 (1.3 lb/ft²)
|Fire Classification||ASTM E84-14||Class A|
|Asbestos Content||NIOSH 9002||Not detected|
|Total Volatile Organic Compound |
|ISO 16000-6 and ISO 16000-9||1111 μg/m3||Meets EU requirements.|
|Volatile Organic Compound |
|CDPH Method V1.1|
[CA Spec, 01350]
|Compliant for schools and offices.*|
|Formaldehyde||EN 717-1||Not detected|
|Lightfastness||ISO 105-B02||Grade 3-4|
|Chemical Resistance||EN 423||Class 0 - No Affect|
• White vinegar
• Isopropyl alcohol
• Mineral oil
• NaOH (5%)
• Bleach (5.25% NaOCl)
• Olive Oil
• Red & white wine
• Coffee & tea
|Class 1- Very Slight|
• Hydrocloric acid (5% HCl)
• Sulfuric acid (5% H2SO4
Our products have been independently tested for conformance with environmental requirements for VOC and formaldehyde emissions; asbestos, lead, and cadmium content.
Concreate Wall Adhesive is a one-component, high-solids, modified-silane polymer with low VOC-content, low odor, and no shrinkage. It has high initial bond strength and is moisture curing, moisture resistant, and permanently elastic. It can also be used as a joint filler between panels and abutting surfaces; it is paintable, sandable, and grey in color.